This doc serves as the first useful resource for understanding the operation and upkeep of the Icom IC-706MKII transceiver. It offers detailed directions on the radio’s options, features, settings, and troubleshooting procedures. Customers depend on it for steering on preliminary setup, superior configuration, and resolving technical points which will come up throughout use. The publication is essential for maximizing the tools’s capabilities and making certain its longevity.
Entry to this information provides important benefits, together with enabling customers to independently configure the system to fulfill particular operational necessities, decreasing reliance on exterior technical assist, and facilitating self-diagnosis and restore. Traditionally, such paperwork have been very important for radio operators, serving as important companions to complicated digital tools. Their availability permits for larger consumer autonomy and promotes a deeper understanding of the know-how concerned.
The next sections will delve into the important thing elements lined inside this essential doc, together with working procedures, superior settings, troubleshooting suggestions, and upkeep pointers. These matters are important for each novice and skilled customers looking for to optimize their use of the Icom IC-706MKII transceiver.
1. Working Directions
Throughout the pages of the tools’s doc, the part devoted to Working Directions stands because the preliminary gateway. It serves as the start line for any consumer, no matter expertise, venturing into the functionalities of the Icom IC-706MKII. With out this information, even probably the most expert radio operator may battle to unlock the system’s full capabilities, doubtlessly resulting in frustration or inefficient use. The connection is prime: the working directions are an indispensable part, a core chapter inside the bigger quantity.
Think about a situation the place a newly licensed newbie radio operator receives an Icom IC-706MKII. Wanting to make their first contact, they energy on the system. With out consulting the detailed clarification of mode choice, frequency adjustment, and squelch management discovered within the devoted directions, they’re left with a silent receiver or garbled transmissions. The working directions present a structured path, explaining every button, knob, and menu choice in a transparent, step-by-step method. The significance of those directions turns into clear: they translate the complicated digital workings into accessible consumer actions.
The absence of practical data hinders the efficient use of this machine. The Working Directions part, subsequently, is greater than only a set of instructions; it’s the key to unlocking communication potential, troubleshooting points, and in the end making certain the longevity of the transceiver. Its complete nature empowers customers to confidently navigate the radio’s options, thus fulfilling the promise of environment friendly and gratifying radio operation. The understanding of this core part bridges the hole between complicated know-how and consumer proficiency.
2. Wiring Diagrams
The doc regarding the Icom IC-706MKII isn’t merely a set of directions; it’s a complete system, the place the “Wiring Diagrams” part types a vital artery. Think about a technician, going through a non-responsive transceiver in a distant subject location. The radio, a lifeline for communication, is lifeless. With out the exact visible steering supplied by these schematics, the technician is left to blindly probe, doubtlessly inflicting additional injury. The “Wiring Diagrams” are greater than strains on a web page; they’re the important thing to understanding the system’s structure, enabling focused troubleshooting and restore. They’re the map to the radio’s inside panorama.
Think about the situation of putting in an exterior amplifier. The instruction detailing the connection could also be vaguely introduced. The handbook’s schematic offers a transparent, unambiguous illustration of the required connections, shielding in opposition to impedance mismatch, sign distortion, and even electrical injury. On this context, the diagram transcends mere visible support; it turns into a protecting measure, making certain the right operation of each the radio and the amplifier. Its presence safeguards in opposition to improper modification, preserving each performance and security. The technician traces the connections, verifies grounding factors, and confirms the sign circulation earlier than making use of energy. The “Wiring Diagrams” part, in such instances, turns into a necessary instrument, stopping doubtlessly pricey errors and making certain optimum system efficiency.
In essence, the connection between the great doc and the “Wiring Diagrams” is symbiotic. The directions present the methodology, however the diagrams supply the visible precision crucial for profitable implementation. The absence of those schematics would render troubleshooting considerably harder, and plenty of modifications not possible. The “Wiring Diagrams” will not be merely a part of the handbook; they’re an indispensable aspect, bridging the hole between theoretical data and sensible software, contributing to the longevity and operational integrity of the Icom IC-706MKII.
3. Troubleshooting Information
The detailed directions that accompany digital tools stand as a testomony to human ingenuity, rigorously composed to shepherd the consumer by complicated technological landscapes. Nonetheless, know-how, no matter its sophistication, generally falters. Throughout the doc for the Icom IC-706MKII, the “Troubleshooting Information” emerges as a important chapter, providing a structured method to diagnosing and resolving operational anomalies. This part isn’t merely a reactive measure; it is a proactive instrument, empowering customers to keep up performance and prolong the lifespan of their tools. It stands as a beacon of data in moments of operational darkness.
-
Symptom-Based mostly Diagnostics
The “Troubleshooting Information” usually employs a symptom-based method. Think about a state of affairs the place the transceiver out of the blue ceases transmitting. The information would current an inventory of potential causes, every aligned with particular signs. As an illustration, “No transmit energy” may lead the consumer to verify antenna connections, energy provide voltage, or microphone performance. This methodical method eliminates random guesswork, streamlining the diagnostic course of. It transforms a doubtlessly overwhelming drawback right into a sequence of manageable steps, growing the probability of a profitable decision. The consumer turns into a detective, following clues introduced inside the information.
-
Part-Degree Fault Isolation
Past easy symptom identification, some superior troubleshooting sections delve into component-level diagnostics. Schematics, usually cross-referenced with the “Wiring Diagrams,” allow the consumer to hint sign paths and determine defective parts. A resistor, capacitor, or transistor might have failed, disrupting the circuit’s integrity. The information offers check factors and voltage readings, permitting the consumer to isolate the issue to a selected a part of the circuit board. This stage of element requires a level of technical talent, however it additionally provides the potential for a extra everlasting and cost-effective restore, avoiding the necessity for a full unit alternative.
-
Calibration Procedures
Generally, malfunctions aren’t the results of outright part failure however reasonably a gradual drift in calibration. The “Troubleshooting Information” might embrace procedures for re-aligning the transceiver’s inside circuitry. This may contain adjusting potentiometers to revive correct frequency accuracy, transmitter energy output, or receiver sensitivity. Calibration ensures the system adheres to its unique specs, sustaining optimum efficiency. This side transforms the information right into a upkeep handbook, stopping long-term degradation and making certain continued dependable operation. It’s much like tuning an instrument, ensuring all the person parts work in unison.
-
Software program and Firmware Points
Trendy transceivers are sometimes managed by embedded software program. Often, bugs or corrupted firmware can result in unpredictable conduct. The “Troubleshooting Information” might present directions for resetting the system, updating the firmware, or reloading default settings. This course of can usually resolve software-related glitches, restoring the transceiver to its meant state. In extreme instances, it’d contain contacting the producer for assist or acquiring a brand new firmware picture. This dimension highlights the interconnectedness of {hardware} and software program, emphasizing the significance of sustaining each for optimum efficiency. The information turns into a roadmap by the digital panorama of the system.
The “Troubleshooting Information,” subsequently, isn’t an remoted chapter, however an integral half of a bigger system of data encapsulated inside the doc. Its effectiveness hinges on its integration with different sections, comparable to “Wiring Diagrams” and “Working Directions.” In essence, the power to diagnose and resolve operational points is straight proportional to the consumer’s familiarity with the totality of the knowledge obtainable, remodeling what may seem to be a posh piece of know-how right into a instrument that may be understood and maintained.
4. Frequency Listings
Throughout the sure pages of the operational information, past circuit diagrams and working procedures, lies a seemingly easy but very important aspect: the “Frequency Listings.” This part isn’t merely a set of numbers; it’s a key, a map to the invisible world of radio waves, and its connection to the broader understanding offered by the great tools doc is paramount.
-
Pre-Programmed Channels
Think about the maritime operator, navigating treacherous waters at nighttime. Reliance on clear, concise communication isn’t a comfort; it’s a matter of survival. The handbook’s “Frequency Listings” present fast entry to pre-programmed marine channels, enabling fast contact with coast guard stations and close by vessels. With out this simply accessible info, beneficial time may very well be misplaced trying to find the right frequency, doubtlessly jeopardizing security. The pre-programmed channels are, in impact, a lifeline embedded inside the system’s operational particulars.
-
Newbie Radio Bands
For the newbie radio fanatic, the “Frequency Listings” element the licensed working frequencies for numerous license courses. It’s greater than a information; it’s a regulatory compass, stopping inadvertent transmission outdoors authorized boundaries. Operation outdoors these allotted bands dangers fines, tools seizure, and even lack of license. The doc offers a safeguard, making certain accountable and compliant use of the tools. It enforces laws inside the context of operation.
-
Emergency Frequencies
Embedded inside the listing are frequencies designated for emergency communications. These channels, usually monitored by devoted response groups, signify a important useful resource throughout crises. Fast entry to those frequencies, offered by the handbook, can expedite the dispatch of support throughout pure disasters, medical emergencies, or search and rescue operations. The doc empowers the consumer to change into a possible first responder, a conduit for help in occasions of want.
-
Repeater Data
Many radio operators depend on repeaters to increase their communication vary. The “Frequency Listings” might embrace info on native repeater frequencies and entry tones, permitting customers to connect with these networked techniques. Repeaters act as sign amplifiers, relaying transmissions over larger distances. The paperwork provision of repeater particulars unlocks the potential for regional and even statewide communication, increasing the system’s operational capabilities past its inherent limitations.
Thus, the “Frequency Listings” part of the tools doc isn’t merely a desk of numbers. It offers prepared entry to maritime frequencies, newbie bands, emergency channels, and repeater particulars. It’s a tangible hyperlink to a broader communications ecosystem, enabling customers to leverage the total potential of their Icom IC-706MKII whereas working inside authorized and moral boundaries.
5. Menu Navigation
The digital coronary heart of the Icom IC-706MKII resides inside its menu system, a labyrinth of settings and choices accessible through a sequence of button presses and knob rotations. To traverse this digital house successfully, the tools handbook serves as an indispensable information, a Rosetta Stone unlocking the secrets and techniques of the system’s operational parameters. With out a clear understanding of the menu construction, the potential of the transceiver stays largely untapped, its superior capabilities locked behind layers of inscrutable settings.
-
Perform Customization
The menu system permits for intensive customization of the system’s features. Squelch ranges, filter settings, and show preferences could be tailor-made to the operator’s particular wants. Think about a consumer working in a loud atmosphere; the handbook’s steering by the menu permits exact adjustment of the noise discount and filter settings, bettering sign readability and decreasing listener fatigue. With out this information, the operator could be relegated to default settings, sacrificing efficiency and doubtlessly lacking essential communications.
-
Reminiscence Administration
The Icom IC-706MKII can retailer quite a few frequencies and settings in its inside reminiscence. The handbook’s directions on menu navigation present a structured method to organizing and recalling these saved channels. Image a catastrophe reduction staff deploying to an affected space. Pre-programmed with very important communication frequencies, the transceiver permits for rapid contact with emergency companies and different responding companies. The handbook is the important thing to accessing these saved sources, making certain environment friendly and coordinated communication throughout important conditions.
-
Superior Options Entry
Lots of the transceiver’s extra superior options, comparable to digital sign processing (DSP) and automated achieve management (AGC), are managed through the menu system. The handbook guides the consumer by the activation and configuration of those options, optimizing efficiency for particular working situations. A DX chaser, looking for to contact distant stations, can make the most of the handbook to fine-tune the DSP settings, enhancing weak alerts and minimizing interference. With out the doc’s route, these refined instruments stay unused, limiting the operator’s capability to attain profitable contacts.
-
Firmware Updates
The menu system usually offers entry to firmware replace features. Common updates can enhance the transceiver’s efficiency, add new options, and tackle potential bugs. The handbook outlines the process for initiating and finishing these updates, making certain the system stays present and appropriate with evolving requirements. A consumer neglecting these updates dangers experiencing operational glitches or lacking out on beneficial enhancements. The steering inside the doc secures the continued functioning of the know-how.
The connection between the doc and the menu system is symbiotic. The handbook offers a map to navigate the system’s complicated settings, unlocking its full potential. Perform customization, reminiscence administration, superior characteristic entry, and firmware updates all rely upon a transparent understanding of the menu construction, as introduced inside the detailed information. In its absence, the consumer is adrift in a sea of digital choices, unable to successfully make the most of the delicate capabilities of the Icom IC-706MKII. It’s the information that modifications complicated know-how into an accessible and useable instrument.
6. Technical Specs
Deep inside the pages lies the part devoted to “Technical Specs,” a seemingly dry compendium of numbers and items, but the bedrock upon which all operational understanding rests. This part, usually missed, dictates the boundaries inside which the Icom IC-706MKII can perform reliably. Ignoring these constraints is akin to navigating uncharted waters and not using a compass, a recipe for tools injury and operational failure. This part serves as an anchor, grounding sensible software in quantifiable actuality. A ham radio operator, planning a long-distance contact, should seek the advice of the facility output specs to pick an acceptable antenna and amplifier, else the transmission may fall quick, or worse, overload delicate parts. The “Technical Specs” are thus not mere information factors; they’re the foundational guidelines of engagement.
Think about a subject engineer, tasked with integrating the Icom IC-706MKII right into a pre-existing communication community. Compatibility is paramount. The doc particulars the impedance of the antenna connector, the voltage necessities of the facility provide, and the audio enter/output ranges. Disregarding these specs might lead to sign degradation, impedance mismatch, and even electrical injury to related gadgets. The “Technical Specs” change into a guidelines, a information to making sure seamless integration and avoiding pricey errors. A radical examination of those particulars transforms a doubtlessly hazardous integration right into a easy and profitable operation, safeguarding each the tools and the community.
In essence, the connection between the core doc and the “Technical Specs” is inseparable. The operational procedures information the consumer on how to make use of the tools, whereas the technical specs dictate what the tools is able to doing, and the situations below which it may reliably accomplish that. Overlooking these specs is a chance, an invite to push the Icom IC-706MKII past its design limits. A radical understanding of this part mitigates the danger, optimizing efficiency, extending tools lifespan, and making certain accountable use of a classy communication system. The information factors signify limits, alternatives, and in the end, the important thing to unlocking the total potential of the system inside protected and dependable parameters.
7. Upkeep Schedules
Throughout the intensive pages of the tools documentation, the “Upkeep Schedules” part emerges not as a mere suggestion, however as a pact between consumer and know-how. These schedules, usually introduced as tables or checklists, are the structured articulation of preventative care, the constant actions designed to thwart the insidious creep of entropy. The absence of adherence to those schedules is a sluggish erosion, a gradual degradation of efficiency that transforms the tools into an unreliable instrument. Think about the situation of a volunteer emergency communications staff whose Icom IC-706MKII transceiver is the only hyperlink to the skin world throughout a distant wilderness search. Neglecting the periodic cleansing of contacts, the inspection of cables for put on, or the recalibration of frequency stability, invitations catastrophe. Over time, corrosion accumulates on the antenna connector, sign power diminishes, and frequency drift renders communications unintelligible. The results will not be theoretical; they’re measured in misplaced time, missed alerts, and doubtlessly, the distinction between rescue and tragedy.
These schedules will not be arbitrary; they’re born from engineering perception, derived from a deep understanding of the supplies, tolerances, and environmental vulnerabilities of the Icom IC-706MKII. The handbook outlines the advisable intervals for lubricating shifting elements, a easy act that forestalls untimely put on and ensures easy operation of tuning dials and switches. It advises on the correct storage situations, shielding the transceiver from extreme humidity or excessive temperatures, situations that speed up corrosion and part failure. Every motion, detailed inside the schedule, is a calculated protection in opposition to the forces that search to decrease the system’s operational lifespan. These schedules translate summary engineering rules into concrete, actionable steps, bridging the hole between design intent and sustained efficiency. The operator who regards the ‘Upkeep Schedule’ isn’t merely following directions; they’re actively taking part within the preservation of a significant instrument.
Ignoring the advisable upkeep degrades the technical functionality of the system. The frequency listings change into unreliable, the interior parts perform sub-optimally, and ultimately, your entire radio might fail resulting from neglect. The “Upkeep Schedules” part, is the trail to stopping these failures by participating in proactive care. The connection between the information’s “Upkeep Schedules” and its general operational integrity is a direct, unavoidable correlation. To ignore one is to compromise the opposite.
8. Components Checklist
The “Components Checklist,” usually relegated to the appendix of the instruction information, represents greater than only a assortment of alphanumeric codes and part descriptions. It’s the key to sustaining the operational lifespan of the tools, performing as a significant reference for restore and upkeep. With out this part, diagnosing a defective part turns into a scavenger hunt by a maze of circuit boards, doubtlessly resulting in misidentification and additional injury. Think about the situation of a subject technician, tons of of miles from the closest provide depot, tasked with repairing a important transceiver. A blown capacitor threatens to silence your entire communication community. The ‘Components Checklist’ part turns into a useful instrument, enabling the exact ordering of the right alternative, minimizing downtime and restoring important performance. It permits for accuracy, making certain the right part is procured, averting additional injury. On this circumstance, the ‘Components Checklist’ strikes from a mere stock to a lifeline, enabling performance to be regained swiftly and effectively.
The existence of the ‘Components Checklist’ additionally fosters a tradition of self-reliance and restore. Quite than discarding a malfunctioning system, it empowers the consumer to undertake component-level repairs, selling resourcefulness and lengthening the tools’s service life. Small digital parts usually fail with age, comparable to resistors, diodes, or transistors. An attentive consumer, guided by the diagram, can substitute the faulty part on the circuit board, thus avoiding a restore invoice. In such circumstances, getting access to a available Components Checklist facilitates accountable upkeep and promotes sustainability by stopping pointless tools obsolescence. The knowledge contained promotes self-sufficiency, minimizing waste and fostering accountable use of apparatus.
In conclusion, the “Components Checklist” inside the detailed instruction handbook isn’t merely a supplementary doc, however an integral part that underpins the repairability, maintainability, and longevity of the Icom IC-706MKII transceiver. It offers a pathway to knowledgeable decision-making, enabling customers to keep up their tools successfully, thus making certain it continues to carry out reliably for years to come back. Challenges exist in finding out of date parts, however the advantages of proactive upkeep outweigh the difficulties. In essence, accountable operators seek the advice of this aspect to keep up optimum perform.
Steadily Requested Questions Relating to the Icom IC-706MKII Operational Information
The next part addresses important inquiries relating to the use and interpretation of the official information. These will not be whimsical ponderings, however important clarifications derived from years of consumer expertise and technical inquiry. Every query represents a possible stumbling block, a degree of confusion that, when resolved, unlocks a deeper understanding of the tools’s capabilities.
Query 1: Is the Icom IC-706MKII instruction booklet merely a suggestion, or is it really important for understanding the transceiver’s operation?
The notion that the information is merely a suggestion is akin to believing a map is optionally available for navigating a dense forest. Whereas some skilled operators may possess intuitive data of radio know-how, the Icom IC-706MKII’s intricacies demand a structured understanding. The instruction booklet isn’t a superfluous accent; it’s the indispensable key to unlocking the system’s full potential, making certain correct operation, and stopping pricey errors.
Query 2: Can the wiring diagrams included within the paperwork be relied upon for correct modification and restore, even after years of use?
The integrity of the wiring diagrams is paramount. Whereas parts might age and connections may corrode over time, the elemental structure depicted within the schematics stays a continuing. Nonetheless, customers should train warning. Examine the diagrams in opposition to the precise system, checking for any undocumented modifications or repairs made beforehand. Moreover, at all times confirm part values with a multimeter earlier than endeavor any modifications, to keep away from the perils of assumptions. Prudence is crucial.
Query 3: If encountering a malfunction not explicitly lined within the troubleshooting part, is the tools information rendered ineffective?
The troubleshooting part, whereas complete, can not anticipate each conceivable failure situation. As a substitute, it offers a framework for systematic analysis. When confronted with an unlisted symptom, use the documented procedures as a basis. Analyze the radio’s conduct, seek the advice of the wiring diagrams, and apply logical deduction. Usually, the answer lies in extrapolating from present data, adapting the documented strategies to the distinctive circumstances. Resourcefulness is essential.
Query 4: Are the frequency listings offered within the handbook definitive and unchanging, or do they require periodic verification?
Frequency allocations will not be static; they’re topic to alter primarily based on regulatory selections and evolving band plans. Whereas the frequency listings inside the instruction handbook present a beneficial start line, operators should cross-reference them with official sources, comparable to authorities regulatory companies and newbie radio organizations. Relying solely on outdated info can result in unlawful transmissions and interference with different companies. Vigilance is paramount.
Query 5: How important is adherence to the upkeep schedules outlined within the handbook, contemplating the strong development of the Icom IC-706MKII?
The strong development of the system belies the insidious results of time and atmosphere. Mud, moisture, and temperature fluctuations take their toll, slowly degrading efficiency and reliability. The upkeep schedules will not be arbitrary options, however are born from diligent analysis. Neglecting these suggestions is akin to ignoring routine oil modifications in a high-performance engine. Eventual failure turns into inevitable. Proactive upkeep, guided by the schedules, extends the life and preserves the performance of the tools.
Query 6: Is it possible for a person with restricted technical experience to make the most of the elements listing for component-level repairs, or is that this greatest left to certified technicians?
Part-level restore requires a sure diploma of technical proficiency. Nonetheless, even people with restricted expertise can undertake fundamental repairs, comparable to changing a blown fuse or a broken connector. The handbook, mixed with on-line sources and steering from skilled operators, can empower customers to deal with these easier duties. The doc offers a useful reference, nonetheless it’s not an alternative choice to the suitable security precautions and instruments, nor for the understanding of digital rules. proceed with warning.
These questions, and their corresponding solutions, signify a distillation of accrued data relating to the utilization of the Icom IC-706MKII operational information. Every level underscores the significance of diligence, resourcefulness, and a dedication to understanding the intricate relationship between consumer and know-how.
The next part will delve into sensible examples and case research, illustrating the real-world software of the rules mentioned herein.
Suggestions from the Icom IC-706MKII Information
The ocean, a relentless trainer, calls for respect and preparation. Its unpredictable nature mirrors the complexities hidden inside the Icom IC-706MKII transceiver. The operational information, greater than a easy assortment of directions, provides essential knowledge, greatest understood by the experiences of those that depend on it.
Tip 1: Grasp the Reminiscence Banks: Think about a solo sailor, battling a sudden squall. The pre-programmed frequencies for emergency climate broadcasts, saved inside the radio’s reminiscence banks, change into a lifeline. Familiarity with the handbook’s reminiscence administration directions permits for fast entry, offering essential warnings that would avert catastrophe.
Tip 2: Antenna Connections Are Sacred: A corroded antenna connection is a silent saboteur. The information emphasizes common inspection and cleansing, stopping sign degradation. Image a distant analysis staff, counting on the IC-706MKII for very important information transmission. A defective connection, simply prevented with routine upkeep, can sever that hyperlink, jeopardizing weeks of analysis.
Tip 3: Know Your Energy Limits: Pushing the transceiver past its specified energy output invitations disaster. The technical specs detailed within the information will not be mere options, however exhausting limits. Overloading the ultimate amplifier stage can result in irreversible injury, silencing the radio on the most crucial second.
Tip 4: Calibrate Commonly: Frequency drift, an insidious enemy, can render communications unintelligible. The handbook outlines calibration procedures, making certain the radio stays true to its meant frequencies. Envision a search and rescue staff, desperately making an attempt to find a downed plane. A miscalibrated radio can lead them astray, squandering precious time in a life-or-death state of affairs.
Tip 5: Doc Your Modifications: Each modification, nonetheless minor, must be meticulously documented. The wiring diagrams, annotated with modifications, change into a useful useful resource for future troubleshooting. A forgotten bypass capacitor or an undocumented floor connection can rework a easy restore right into a protracted ordeal.
Tip 6: The Squelch is Your Pal: Grasp the squelch management. A accurately configured squelch eliminates background noise, bettering readability and decreasing fatigue. Think about a navy unit counting on the IC-706MKII. Mastering the settings permits important information to be heard clearly.
Tip 7: Battery Backup is Essential: An influence outage can silence even probably the most refined transceiver. The handbook emphasizes the significance of a dependable battery backup system. A sudden grid failure throughout a pure catastrophe renders the radio ineffective. Correct planning can stop this.
The operational information is greater than only a listing of directions; it’s a repository of sensible knowledge, gleaned from numerous hours of expertise. Heeding its recommendation isn’t merely a matter of technical competence, however a mark of duty, making certain dependable communication when it issues most. The information from the Icom IC-706MKII information will preserve customers working safely.
The Enduring Steerage
This exploration has unveiled the important function of the icom 706 mk2 handbook. From working directions to wiring diagrams, from troubleshooting to elements lists, this useful resource serves as an indispensable companion to the transceiver. It empowers customers to unlock the total potential of the tools, keep its performance, and guarantee dependable communication, solidifying its place as greater than only a easy booklet.
Now, with a deeper understanding of this important information, bear in mind its worth. Let it’s a continuing reference, a instrument for self-reliance, and a supply of confidence within the face of technical challenges. The pages maintain the important thing not solely to working a radio, however to making sure efficient communication when it issues most.
